韩国精品一区二区三区四区_伊人久久大线影院首页_JIZZJIZZ丝袜老师_玩弄粉嫩少妇高潮出白浆AⅤ

您好,歡迎訪問濟南愛窗加工部 的網站!
客戶服務熱線:13296405222

地址:濟南市天橋區天橋東街后陳家樓31號

聯系我們
濟南愛窗加工部

聯系人:孟經理

聯系電話:13296405222

網址://domachine.com.cn

地址:濟南市天橋區天橋東街后陳家樓31號

當前位置: 首頁 > 新聞資訊 > 行業新聞

防火卷簾門常見問題和修理方法!

來源://domachine.com.cn/  發布時間:2020-05-05 18:32:24

防火卷簾門高度透明,美觀,廣泛應用于人們的生活中。然而,由于木制品的特殊屬性,在使用過程中可能會出現水分和裂縫等現象。今天防火卷簾門廠家給大家講講防火卷簾門常見的問題和修理方法。
The fireproof rolling shutter door is highly transparent and beautiful, which is widely used in people's life. However, due to the special properties of wood products, moisture and cracks may appear in the process of use. Today, fire shutter door manufacturers tell you about the common problems and repair methods of fire shutter door.
1、防火卷簾門開關不順暢
1. The fire shutter door doesn't switch smoothly
這種情況可能是由于以前的安裝有問題。門硬件可能存在問題。如果安裝有問題,您需要聯系安裝人員進行更正。在硬件的情況下,對齊頁面將相對松散。
This may be due to a problem with the previous installation. There may be a problem with the door hardware. If there is a problem with the installation, you need to contact the installation personnel to correct it. In the case of hardware, aligned pages will be relatively loose.
             濟南防火卷簾門安裝維修
2、防火卷簾門的變形
2. Deformation of fireproof rolling shutter door
由于防火卷簾門對環境和空氣要求較高,空氣中的濕度和溫度過高,如果它們太低,門會受到影響,就會發生變形。如果變形很輕,可以手動校正。如果變形嚴重,要聯系售后服務并退回。
Due to the fire shutter door on the environment and air requirements are higher, the air humidity and temperature is too high, if they are too low, the door will be affected, it will be deformed. If the deformation is very light, it can be corrected manually. If the deformation is serious, contact the after-sales service and return it.
3、超大防火卷簾門的下沉
3. Sinking of super large fireproof rolling shutter door
如果門鉸鏈松動,抬起門并擰緊所有螺釘。如果門鉸鏈本身質量不好而且材料很薄,如果鉸鏈因門的重力而變形,則鉸鏈會發生變化。
If the door hinge is loose, lift the door and tighten all screws. If the quality of the door hinge itself is poor and the material is very thin, if the hinge is deformed due to the gravity of the door, the hinge will change.
4、防火卷簾門鼓發泡
4. Foaming of fireproof rolling shutter door
可能是加工過程中溫度過高或粘合劑不均勻造成的。如果你不認真,你可以在涂漆前拋光門體。由于它無法修復或氣泡不斷擴散,我們建議您訂購并重新制作。
It may be caused by high temperature or uneven adhesive during processing. If you are not serious, you can polish the door body before painting. As it can't be repaired or the bubbles keep spreading, we suggest you order and remake it.
感謝您的閱讀,希望以上內容對您有所幫助,如您想了解更多精彩內容請點擊我們的官網:濟南防火卷簾門安裝維修
Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Jinan fire shutter door installation and maintenance.