1、門窗可以用固定鋼板(或燕尾鐵腳)的金屬膨脹螺栓與磚墻連接。嚴禁用釘子在磚墻上固定門窗。與鋼筋混凝土墻一樣，當使用固定鋼板時，應使用水泥砂漿縫縫縫隙。用聚氨酯泡沫密封劑或其他柔性材料填充間隙時，應用燕尾鐵腳固定。

 

1. Doors and windows can be connected with brick wall by metal expansion bolts of fixed steel plate (or swallow tail iron foot). It is strictly forbidden to fix doors and windows on brick walls with nails. As with reinforced concrete walls, when fixed steel plates are used, cement mortar shall be used to sew the gaps. When the gap is filled with polyurethane foam sealant or other flexible materials, it is fixed with swallow tail iron feet.

 

2、門窗與鋼筋混凝土墻之間的連接可以采用固定鋼板(或燕尾鐵腳)、射釘或金屬膨脹螺栓。固定門窗采用固定鋼板連接時，周圍框架與門窗墻體之間的縫隙也應采用水泥砂漿填充。水泥砂漿塞縫能使門窗外框牢固可靠地與墻體連接，對門窗外框材料的加固起到重要作用。電動伸縮門廠家建議當用聚氨酯泡沫密封劑或其他柔性材料填充縫隙時，固定鋼板應更換燕尾鐵腳，以保證門窗連接的可靠性。

 

2. The connection between doors and windows and reinforced concrete wall can adopt fixed steel plate (or swallow tail iron foot), shooting nail or metal expansion bolt. When the fixed doors and windows are connected with fixed steel plates, the gap between the surrounding frame and the walls of doors and windows should also be filled with cement mortar. Cement mortar caulking can make the door and window frame firmly and reliably connected with the wall, and plays an important role in the reinforcement of the door and window frame materials. The electric telescopic door manufacturer suggests that when the polyurethane foam sealant or other flexible material is used to fill the gap, the fixed steel plate should be replaced with the swallow tail iron foot to ensure the reliability of the door and window connection.

 

3、鋼架適用于門窗與各種墻體的連接。安裝精度高，連接可靠，但成本高。燕尾鐵腳與預埋件的焊接連接方法，適用于門窗與輕墻的連接。燕子尾鐵腳及預埋件采用鋼筋或角碼焊接調整。燕尾鐵腳焊法可用于門窗與鋼結構的連接。燕尾鐵腳與鋼結構之間的連接是用鋼筋或角鋼焊接來調整的。

 

5.jpg

 

3. The steel frame is suitable for the connection of doors, windows and various walls. The installation precision is high, the connection is reliable, but the cost is high. The welding connection method of swallow tail iron foot and embedded parts is suitable for the connection of doors and windows and light wall. The swallow tail iron feet and embedded parts are welded and adjusted by steel bar or corner code. Swallow tail iron foot welding method can be used to connect doors and windows with steel structure. The connection between dovetail iron foot and steel structure is adjusted by welding steel bar or angle steel.

 

1、制定保養計劃，及時清理電動伸縮門的軌道，保持內部清潔，但軌道表面不能加油，保持軌道運行暢通。伸縮門電機和傳動鏈條表面的灰塵需及時清理，并注意添加潤滑油。檢查控制箱內器件和開關控制盒，緊固接線端子，清潔控制箱內、表面和按鈕上的灰塵污物。

 

1. Make a maintenance plan, clean the track of the electric telescopic door in time, keep the inside clean, but the surface of the track can not be refueled to keep the track running smoothly. The dust on the surface of the motor and drive chain of the telescopic door shall be cleaned in time, and the lubricating oil shall be added. Check the components in the control box and switch control box, fasten the wiring terminals, and clean the dust and dirt in the control box, on the surface and on the button.

 

2、注意經常檢查伸縮門上下行程開關，對滑軌加潤滑油，另外提醒操作人員手動控制伸縮門，檢查器運行情況，聽證上下行程開關位置，使電動伸縮門開啟或關閉時處于適當位置，且檢查過程中嚴防伸縮門沖頂或沖底。

 

2. Pay attention to frequently check the up and down travel switch of the telescopic door, add lubricating oil to the slide rail, and remind the operator to manually control the telescopic door, check the operation of the device, and check the up and down travel switch position, so as to make the electric telescopic door in a proper position when it is opened or closed, and strictly prevent the telescopic door from rushing to the top or bottom during the inspection.

 

以上的精彩內容來自：濟南電動卷簾門安裝維修詳細的內容請點擊進入我們的網站進行查詢對接：//domachine.com.cn

 

The above wonderful content comes from: Jinan electric roller shutter door installation and maintenance. For details, please click to enter our website for query and docking: //domachine.com.cn