列舉幾點卷簾門運用中的留意事項
有些人總以為卷簾門只要是留意不受潮,就能夠一向運用。這種觀念其實是比較片面的,假如不留意運用,加速耗費和磨損,再堅固的東西也會有銷毀的。下面列舉幾點卷簾門運用中的留意事項。
Some people always think that roller shutter doors can be used all the time as long as they are kept away from moisture. This concept is actually one-sided. If you don't pay attention to its application and accelerate the consumption and wear, even the strongest things will be destroyed. Here are some precautions for the use of roller shutter doors.
1、留意升降速度:合理的升降速度能削減動力糟蹋與傳動部件的沖突損耗,也有助于延伸變頻器的的運用壽數。這能夠按實際需要來設定卷簾門的敞開及封閉速度,不要過快或是過慢;
1. Pay attention to the lifting speed: a reasonable lifting speed can reduce the conflict between power waste and transmission parts, and also help to extend the service life of the frequency converter. This can set the opening and closing speed of the roller shutter door according to the actual needs, not too fast or too slow;
2、留意平時養護:卷簾門門簾和易銹部位,要進行定時油漆及防繡養護處理,制止用重物、硬物沖擊門面。
2. Pay attention to usual maintenance: the rolling shutter door curtain and rust prone parts should be regularly painted and anti embroidered, and it is forbidden to impact the door surface with heavy objects and hard objects.
3、裝置時要預留空間,便利日后的保護和養護:卷簾門裝置方位的上端,要有牢靠的防火設備,在卷簾門的卷筒下端做包箱或吊頂時設置可拆式活動蓋板,在電動卷門機一側下端有必要預留500×500mm可拆檢修孔,以便于維修養護。
3. Space shall be reserved during installation to facilitate future protection and maintenance: the upper end of the device orientation of the rolling shutter door shall be equipped with reliable fire prevention equipment. When making a box or ceiling at the lower end of the drum of the rolling shutter door, a removable movable cover plate shall be set. It is necessary to reserve 500 at the lower end of one side of the electric rolling shutter × 500mm removable manhole for maintenance.
4、定時對機器進行檢查,避免意外事故的發作;
4. Check the machine regularly to avoid accidents;
In addition, there are some tips for the use of roller shutter doors at ordinary times. Jinan roller shutter door installation and maintenance personnel will talk about:
1、卷簾門關上后假如簡單不啟自開,既不便利又欠,可找一塊巨細適宜的強力磁鐵,平埋在門框上方約為門高的1/4處,再在門扇與門框相吻合的當地釘上一塊鐵皮,就可避免不銹鋼卷簾門不啟自開。
1. If you simply don't open the rolling shutter door automatically after it is closed, it's inconvenient and unsafe. You can find a powerful magnet of suitable size, which is horizontally buried above the door frame at about 1/4 of the door height, and then nail a piece of iron sheet on the place where the door leaf matches the door frame, so as to avoid the stainless steel rolling shutter door from not opening automatically.
2、家居的卷簾門常常要開關,當翻開后,通常直接抵撞著墻,時刻久了,卷簾門上的鎖盒和拉手簡單在墻面上碰出印痕,損壞墻和門,影響美觀。可找一塊約5厘米厚的橡皮塊或在小木塊上釘一塊厚橡皮,將其釘在房門里側靠合頁一邊的下角,就不會使門、窗撞損。
2. The rolling shutter door at home often needs to be opened and closed. When it is opened, it usually hits the wall directly. After a long time, the lock box and handle on the rolling shutter door simply hit the mark on the wall, damaging the wall and door and affecting the beauty. You can find a piece of rubber about 5cm thick or nail a piece of thick rubber on a small wooden block and nail it in the lower corner of the door, which is close to the hinge side, so that the door and window will not be damaged.
在卷簾門出現問題時,尤其是家居用戶,一定要聯絡的人員來進行檢修,切不可自個拆開,避免發作意外無法控制。更多相關卷簾門維修事項就來我們網站
//domachine.com.cn咨詢吧。
When there is a problem with the rolling shutter door, especially household users, we must contact professional personnel for maintenance. We must not disassemble it by ourselves to avoid accidents and uncontrollable. Please come to our website for more information about the maintenance of roller shutter doors //domachine.com.cn Consult.