電動卷簾門現如今采用的都是十分普遍，許多倉庫廠房出入機動車輛的正門，各類很多住宅樓的汽車車庫還是會采用電動卷簾門。因為其造型設計整潔、功能完善、操控便捷、停機時也可手動式實際操作，因此被大批量應用。電動卷簾門主要包括由端板、卷軸、卷簾門電機、傳動鏈條、滑軌、卷門簾片、電控箱等構件構成。

 

Nowadays, the electric rolling shutter doors are widely used. Many warehouses and workshops access the main doors of motor vehicles, and many kinds of car garages in residential buildings still use electric rolling shutter doors. Because of its neat design, perfect function, convenient operation, and manual operation during shutdown, it is widely used. The electric rolling shutter door mainly consists of end plate, roller, rolling shutter motor, transmission chain, slide rail, rolling shutter sheet, electric control box and other components.

 

防火卷簾門是一種適用于建筑物較大洞口處的防火、隔熱設施，產品在設計安裝上起到了一定的作用技術。防火卷簾門廣泛應用于工業與民用建筑的防火隔斷區，能有效地阻止火勢蔓延，保障生命財產，是現代建筑中不可缺少的防火設施。

 

Fireproof rolling shutter door is a kind of fire prevention and heat insulation facilities suitable for large openings of buildings. The product plays a certain role in the design and installation. Fire shutter door is widely used in industrial and civil building fire partition area, can effectively prevent the spread of fire, protect the safety of life and property, is an indispensable fire prevention facilities in modern buildings.

 

9.jpg

 

從受火作用起到背火面熱輻射強度超過臨界熱輻射強度規定值時止，或簾板面竄火時止。這段時間稱為耐火極限，用以決定鋼防火卷簾的耐火性能等級。

 

From the action of fire to the time when the heat radiation intensity of the back fire surface exceeds the specified value of the critical heat radiation intensity, or when the curtain plate surface is on fire. This period of time is called fire resistance limit, which is used to determine the fire resistance grade of steel fire shutter.

 

簾板、座板、導軌、門楣、箱體應采用鍍鋅鋼板和鋼帶，以及普通碳素結構鋼。卷軸用碳素結構鋼或普通碳素結構鋼，以及電焊鋼管或無縫鋼鋼管。支座應用普通碳素結構鋼或灰口鑄鐵。簾板厚1.2～2.0mm、掩埋型導軌厚1.5～2.5mm、外露型鋼板導軌厚度≥3.0mm，簾板嵌入導軌的深度應符合下表要求。

 

The curtain plate, seat plate, guide rail, lintel and box body shall be made of galvanized steel plate and strip, as well as ordinary carbon structural steel. High quality carbon structural steel or ordinary carbon structural steel, electric welded steel pipe or seamless steel pipe are used for reels. The bearing shall be made of ordinary carbon structural steel or gray cast iron. The thickness of the curtain plate is 1.2-2.0 mm, the thickness of the buried guide rail is 1.5-2.5 mm, and the thickness of the exposed steel plate guide rail is ≥ 3.0 mm. The depth of the curtain plate embedded in the guide rail shall meet the requirements in the table below.

 

安裝要求：鋼防火卷簾安裝在建筑物墻體上，應與墻內埋件焊接或預埋螺栓連接，也可用膨脹螺栓安裝，但其錨固強度必須滿足要求。

 

Installation requirements: when the steel fire shutter is installed on the building wall, it should be welded with the embedded parts in the wall or connected with the embedded bolts. It can also be installed with expansion bolts, but its anchoring strength must meet the requirements.

 

在操作使用過程中，操作人員不得擅自離開操作地點。應密切注意啟閉情況和執行情況，在啟閉時卷簾下面不準有人站立、走動。以防止行程開關失靈，卷簾卡死，電機受阻和發生其它事故。 防火分區和防火隔斷的鋼質防火卷簾平時不作頻繁使用，一旦區域發生火情。卷簾應有效地投入使用，帶有聯動控制、自動控制防火卷簾務必根據一套控制指令程序進行。

 

In the process of operation, the operator shall not leave the operation site without authorization. Close attention should be paid to the opening and closing situation and the implementation. No one is allowed to stand or walk under the rolling shutter when opening and closing. In order to prevent travel switch failure, roller shutter stuck, motor blocked and other accidents. Fire compartment and fire partition of steel fire shutter usually do not make frequent use, once the area of fire. The rolling shutter should be put into use effectively, with linkage control and automatic control. The rolling shutter must be carried out according to a set of control instruction program.

 

今天的精彩內容由濟南電動卷簾門安裝維修提供，真誠為您提供滿意的服務，如果您有疑問或者是問題請歡迎來電咨詢，或者是進入我們的網址：//domachine.com.cn

 

Today's wonderful content is provided by the installation and maintenance of Jinan electric roller shutter door. We sincerely provide you with satisfactory service. If you have any questions or questions, please call us or enter our website: //domachine.com.cn

 

電動卷簾門安裝中關鍵步驟介紹

電機是整道電動卷簾門的中心地址，也是整道電動卷簾門的大腦，控制著整道電動卷簾門的存亡，所以電機設備及限位調試在全部電動卷簾門設備程序中關重要。假設電機發作缺陷需要替換時，這個修補也要非常留神。下面濟南電動卷簾門安裝維修小編就和大家介紹一下電動卷簾門的一些常識。

 

The motor is the central address of the whole electric rolling door, and it is also the brain of the whole electric rolling door. It controls the survival of the whole electric rolling door, so the motor equipment and limit debugging are very important in all the electric rolling door equipment programs. If the motor needs to be replaced, the repair should also be very careful. The following Jinan electric roller shutter door installation and maintenance of small series and you introduce some common sense of electric roller shutter door.

 

電動卷簾門的電機與卷筒芯軸之間是由傳動鏈條來聯接，電機地腳用螺釘固定在鏈輪支架板上。設備或替換電機前，必須將卷簾門降端或用支架將卷簾門撐住。這是由于一是卷簾門的制動是靠電機本體上的制動器來起效果，電機吊銷后，卷簾門則沒有制動而主動下滑;二是可以使傳動鏈條放松，便當將鏈條取下。

 

The motor of the electric rolling shutter door is connected with the mandrel of the drum by a transmission chain, and the motor anchor is fixed on the sprocket support plate with screws. Before replacing the equipment or motor, the rolling shutter door must be lowered to the lowest end or supported by a bracket. This is due to the following reasons: first, the brake of the rolling shutter door depends on the brake on the motor body; after the motor is cancelled, the rolling shutter door does not brake and slides down actively; second, the transmission chain can be relaxed so that the chain can be removed easily.

 

濟南電動卷簾門安裝維修

 

Installation and maintenance of Jinan electric rolling shutter door

 

替換電機的進程：將電機接線做好符號然后吊銷，將電機地腳螺絲擰松將傳動鏈條摘下，畢竟將電機地腳螺絲吊銷將電機取出;新電機設備次序相反，但要留神，電機設備好后，其本體上的環形手拉鏈條應天然筆直向下，不得有卡阻表象。

 

The process of replacing the motor: mark the motor wiring and then cancel it, loosen the motor anchor screw and take off the drive chain. After all, cancel the motor anchor screw and take out the motor; the order of new motor equipment is opposite, but pay attention to it. After the motor equipment is finished, the circular hand zipper bar on the body should be natural and straight down, and there should be no jamming appearance.

 

電機替換結束后，檢查線路、機械組織均無疑問，卷簾門下方無障礙物，門下禁止通行，招認后初步試車調試限位。卷簾門的限位組織是設備在電機外殼上，稱為限位螺套滑塊式。試機前應先松開限位組織上的鎖緊螺釘，然后用手拉動環形鏈條使門簾離地上1米分配，先試“上”、“停”、“下”按鍵，調查卷門升、停、降各功用是不是活絡牢靠，若正常即可將門簾上升或下降到判定的方位，然后旋轉限位螺套，調整碰微動開關滾輪，聽到“滴答”聲后，擰緊鎖緊螺釘。重復調試，使限位抵達方位時，再將鎖緊螺釘用力旋緊即可。

 

After the replacement of the motor, check the circuit and mechanical organization. There are no obstacles under the rolling shutter door. No traffic is allowed under the door. After admitting, test run and adjust the limit. The limiting organization of rolling shutter door is the device on the motor shell, which is called limiting screw sleeve sliding block type. Before the machine test, loosen the locking screw on the limit organization, and then pull the circular chain by hand to distribute the curtain 1 meter above the ground. First, try the "up", "stop" and "down" buttons to investigate whether the functions of the door lifting, stopping and lowering are flexible and reliable. If normal, the curtain can be raised or lowered to the determined position, and then rotate the limit screw sleeve to adjust the touch to the microswitch roller to hear the noise After the "tick" sound, tighten the locking screw. Repeat the debugging to make the limit reach the best position, and then tighten the locking screw.

 

電動卷簾門在工序被很多選用，所以多點了解電動卷簾門的工業知識都是一件好事，也便當往常的運用。

 

Electric roller shutter door in the process is a lot of choice, so more understanding of the industrial knowledge of electric roller shutter door is a good thing, also easy to use as usual.

 

濟南電動卷簾門安裝維修

 

Installation and maintenance of Jinan electric rolling shutter door

 

電動卷簾門的安裝方法(a)預留￠32mm PVC管道,從控制盒的位置下端往下地平面以下,穿墻往外,軌道大致位置地平面下0.1-0.15米處,供以后伸縮門室外線路入室。

 

Installation method of electric rolling shutter door (a) reserve ￠ 32mm PVC pipe, from the lower end of the control box to below the ground level, through the wall to the outside, to the approximate position of the track, 0.1-0.15m below the ground level, for the outdoor line of the expansion door to enter the room.

 

(b)安裝伸縮門，接好線路，調試開關控制盒。

 

(b) Install the telescopic door, connect the line, and debug the switch control box.

 

(c)按照上表得出門洞長度，砌門洞時洞寬內凈空不小于0.75-0.8米,高度內凈尺寸普通門不小于門高+0.25米,豪華門不小于門高+0.1米;門洞末端里側中上端留寬0.4米,高0.6米檢修孔,有條件的可將門洞總長度再加長0.2-0.3米,這樣可將檢修孔改成一扇小門,方便日后檢修維護伸縮門電氣線路;

 

(c) According to the above table, when building the door opening, the inner clearance of the opening shall not be less than 0.75-0.8m, the inner clearance of the height shall not be less than + 0.25m for ordinary doors and + 0.1M for luxury doors; the middle and upper end of the inner side of the end of the door opening shall be provided with a manhole with a width of 0.4m and a height of 0.6m. If possible, the total length of the door opening can be further extended by 0.2-0.3m, so that the manhole can be changed into a small door, It is convenient to repair and maintain the electrical circuit of the telescopic door in the future;

 

(d)將220V電源引到控制盒的位置下端,要求是再帶1根接地線,粗細規格為1.37,而且有漏電保護裝置,并采用PVC暗敷;

 

(d) To lead the 220 V power supply to the lower end of the control box, it is better to bring another grounding wire, with the thickness of 1.37, leakage protection device and PVC concealed laying;

 

(e)確定傳達室內控制盒的位置,即操縱伸縮門開關的裝置位置;

 

(e) Determine the position of the indoor control box, that is, the position of the device to operate the telescopic door switch;

 

(f)在鋪設軌道前除留下約0.8-0.9米寬外,先做好兩邊的地面;2-3日(冬天5-7日)后,再在鋪設軌道的同時,土建配合做好軌道處的地面，注意鋪設軌道期間，路面禁止通行，以免壓彎軌道;

 

(f) Before laying the track, in addition to leaving a width of about 0.8-0.9 meters, the ground on both sides should be prepared first; after 2-3 days (5-7 days in winter), while laying the track, the civil engineering should cooperate with the ground at the track. During laying the track, the road should not be allowed to pass, so as to avoid bending the track;

 

如果您對濟南電動卷簾門安裝維修還有哪些不懂的問題，是可以直接咨詢以下的網址：//domachine.com.cn

 

If you have any questions about the installation and maintenance of Jinan electric rolling shutter door, you can directly consult the following website: //domachine.com.cn

 

防火門的安裝應該注意哪些標準？

 

 

1、鋼質隔熱防火門裝置對應在結構質量經過檢驗合格后進行。

 

1. The installation of steel thermal insulation fire door shall be carried out after the structural quality has passed the inspection.

 

2、按圖紙尺度彈好門窗中心線，并彈好室內+50cm標準水平線，核對門洞口尺度及標高是否契合規劃要求，如發現問題，有必要提早處理。

 

2. Snap the center line of doors and windows according to the drawing scale, and snap the indoor + 50cm standard horizontal line, check whether the door opening scale and elevation meet the planning requirements, if any problem is found, it is necessary to deal with it in advance.

 

3、查看口兩邊的預埋木磚、預留空泛，其位置應契合要求，發現問題，要提早處理好。

 

3. Check the embedded wood bricks and reserved voids on both sides of the opening, and their positions should meet the requirements. If problems are found, they should be handled well in advance.

 

4、鋼質隔熱防火門裝置有必要選用預留洞口的辦法，不得選用邊裝置砌口或許先裝置后砌口的辦法。

 

4. It is necessary to select the method of reserving openings for the installation of steel thermal insulation fire door. It is not allowed to select the method of edge installation or installation first and then installation.

 

5、依據圖紙要求，查看門窗的種類、標準、敞開方向及組合件、附件，并對其外形尺度及平整度查看校正，合格后方可裝置。

 

5. According to the requirements of the drawing, check the type, standard, opening direction, assembly and accessories of doors and windows, and check and correct the external dimension and flatness. The installation can be started only after it is qualified.

 

資料、東西質量要求

 

4.jpg

 

Quality requirements of materials and materials

 

1、鋼質隔熱防火門的標準、型號應契合規劃要求。

 

1. The standard and model of steel thermal insulation fire door should meet the planning requirements.

 

2、鋼質隔熱防火門資料要具有產品的出廠合格證及質量確保書。

 

2. The data of steel thermal insulation fireproof door shall have the factory certificate and quality assurance certificate of the product.

 

3、鋼質隔熱防火門要由有資質的加工廠加工。

 

3. Steel heat insulation fire door should be processed by qualified professional processing plant.

 

4、計量東西應是經法定檢驗合格的產品。

 

4. The products to be measured shall be the products that have passed the statutory inspection.

 

5、施工東西運用前應進行性和適用性查看。

 

5. Check the safety and applicability before using the construction equipment.

 

6、操作之前，先準備好機具，所用機具應完全、適用、無障礙，以確保施工質量和出產順利進行。

 

6. Before operation, machines and tools should be prepared. All machines and tools should be complete, applicable and barrier free to ensure the construction quality and smooth production.

 

7、操作之后，清點收拾機具，妥善保管，以便再用。

 

7. After operation, check and tidy up the machines and tools, and keep them properly for reuse.

 

有了濟南防火卷簾門安裝維修上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：//domachine.com.cn   或者來電咨詢，我們會盡全力為您

 

With the summary of the installation and maintenance of Jinan fire shutter door, we hope to help our customers. If you have any questions that you don't understand or ask for help, please click our website: //domachine.com.cn   Or call consultation, we will try our best to solve for you