1、 When installing fast rolling shutter doors, it is necessary to hire installation personnel for installation. Generally, manufacturers provide corresponding installation services, and these items must be confirmed with the manufacturer before purchase. This is convenient for us to solve any problems that arise in the future in a timely manner.

二、在安裝人員安裝布線時，必須要依照建筑施工標準及電氣標準來進行，線徑要不低于1.5MM，同時，電源線接到有接地的插座上，嚴禁去除電源線上的接地引線。這樣保用電，可以讓我們避免一些不必要的擔心。

2、 When installing wiring, installation personnel must comply with building construction standards and electrical standards, with a wire diameter of no less than 1.5mm. At the same time, the power cord should be connected to a grounded socket, and it is strictly prohibited to remove the grounding lead from the power cord. This way of ensuring electricity safety can help us avoid unnecessary worries.

三、快速門安裝調試后，門體運行需要檢查是否順暢，運行中不會出現卡滯現象。同時，開門機需要安裝在帶有平衡彈簧、性能良好的門體上，這樣以免造成開門機超載，出現損壞。門體導軌末端應加裝機械限位裝臵或緩沖助推器，以防門體滑出。這些方面的注意可以讓快速卷簾門更加的快速運行。

3、 After the installation and debugging of the fast door, it is necessary to check whether the door body runs smoothly and there will be no jamming during operation. At the same time, the door opener needs to be installed on a door body with a balance spring and good performance to avoid overloading and damage to the door opener. Mechanical limit devices or buffer boosters should be installed at the end of the door guide rail to prevent the door from sliding out. These aspects of attention can make the fast rolling shutter door operate more quickly and safely.

四、控制箱應該固定人員容易操作的地方，并且，距離地面不宜太高，也不可以太低，適合的高度一般來說1.4米左右就可以了。這樣就既可以很好的避免兒童隨意觸碰，并且又在工作人員容易操作的高度。日常的高速門運行控制，如手柄這類小物件，要*人員專人保管，以免遺失。這樣方便以后有什么問題可以得到很好的，以免出現問題推卸責任。

4、 The control box should be fixed in a place that is easy for personnel to operate, and should not be too high or too low from the ground. The suitable height is generally around 1.4 meters. This can effectively prevent children from touching them at will and at a height that is easy for staff to operate. Daily high-speed door operation control, such as small items such as handles, should be kept by dedicated personnel to avoid loss. This is convenient for solving any problems in the future, so as to avoid shirking responsibility for any problems.

五、高速門門體運行時，行人、車輛不可以從門體下方通過或是在下方停留，以防發生意外事故。快速卷簾門出現故障時，需要及時修理，*步是切斷電源，然后再確定門體是否沒有墜落危險，檢查完這些之后，后再去找人員來進行維修。這些步驟一定不能亂，一步一步的進行，這樣也可以避免不的事情發生。

5、 During the operation of the high-speed door body, pedestrians and vehicles are not allowed to pass through or stay below the door body to prevent accidents. When there is a malfunction in the fast rolling shutter door, it needs to be repaired in a timely manner. The first step is to cut off the power supply, and then confirm whether the door body is not in danger of falling. After checking these, find personnel for repair. These steps must not be disorderly and carried out step by step, which can also prevent unsafe things from happening.

本文來自：濟南防火卷簾門安裝維修更多的內容請點擊：//domachine.com.cn我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article comes from: Installation and maintenance of Jinan fireproof rolling shutter doors. For more information, please click on: //domachine.com.cn We will provide a satisfactory service for the questions you ask. Welcome to call us!