濟南車庫門：車庫遙控器怎么配對?

來源：//domachine.com.cn/  發布時間：2023-05-13 16:18:49

　　車庫遙控器怎么配對?

How to pair the garage remote control?

　　1、準備的新車庫門遙控器的型號要跟舊的車庫遙控器一樣;

1. The model of the new garage door remote control prepared should be the same as the old garage remote control;

　　2、新車庫門遙控器上面的兩個按鍵同時按住，看到遙控器上的紅燈一直在閃動的時候，就可以松開按鍵了，這說明清碼成功了;

2. Press and hold the two buttons on the new garage door remote control at the same time. When you see the red light on the remote control flashing continuously, you can release the button, which indicates successful code clearing;

　　3、把新舊車庫門遙控器放在一起，并且同時按下同一個位置的按鍵，如果看到遙控器上的紅燈閃動了，那就表面這個按鍵已經跟新的遙控器匹配成功了，就可以松開兩個遙控器的按鍵;

3. Place the new and old garage door remote controls together, and simultaneously press the button in the same position. If you see the red light flashing on the remote control, it indicates that the button has been successfully matched with the new remote control, and you can release the buttons on both remote controls;

　　4、如果匹配的時候，按下按鍵指示燈只是亮了一下就不亮了，這表面沒有匹配成功，要重新再匹配一次;

4. If the indicator light only lights up once when pressing the button during matching, it does not appear to be successful and needs to be matched again;

　　5、按照這個方法把剩余的車庫門遙控器逐一匹配。

5. Follow this method to match the remaining garage door remote controls one by one.

　　如何配遙控車庫門遙控器?

How to equip a remote control garage door remote control?

　　1、按住1到2秒電機后方的開門機對碼鍵，指示燈會一直亮著;

1. Press and hold the door opening machine code key behind the motor for 1 to 2 seconds, and the indicator light will remain on;

　　2、按下車庫門遙控器上的開門鍵，每按一次遙控器跟開門機的指示燈都會亮起，連續按4次，4次都同時亮指示燈，那就說明對碼成功了;

2. Press the door open button on the garage door remote control, and the indicator lights of the remote control and door opener will light up every time you press them. Press them continuously for 4 times, and the indicator lights will light up simultaneously for 4 times, indicating that the code matching has been successful;

　　3、對碼成功之后，開門機的指示燈會熄滅，如果指示燈還在亮，這就說明開門機還是處于對碼的狀態，所以在完成對碼之后，要再次按一下電機后方的開門機對碼鍵來退出對碼。

3. After successful code matching, the indicator light of the door opener will turn off. If the indicator light is still on, it indicates that the door opener is still in the code matching state. Therefore, after completing the code matching, press the door opener code matching button behind the motor again to exit the code matching.

本文由  濟南車庫門 為您精心提供，如想了解更多請點擊我們的網站：//domachine.com.cn，我們將會以的熱情為您解答!

This article is carefully provided by Jinan Garage Door. If you want to learn more, please click on our website: //domachine.com.cn We will answer you with the greatest enthusiasm!