在對濟南電動卷簾門安裝維修時有一些需要注意的事項，在卷簾門維系過程中操作人員不能擅自的離開操作點，應密切注意卷簾門的啟閉情況和執行情況，對卷簾門維修時千萬不能有人站立或是在門下走動，以防卷簾門行程開關失靈，發生事故。檢查電器線路和電器設備是否損壞，如果遭到損壞要及時維修，以免出現不必要的麻煩。

There are some matters needing attention during the installation and maintenance of Jinan electric roller shutter door. During the maintenance of roller shutter door, the operator shall not leave the operating point without authorization, but shall pay close attention to the opening and closing conditions and execution of roller shutter door. During the maintenance of roller shutter door, no one shall stand or walk under the door, to prevent the failure of roller shutter door travel switch and accidents. Check whether the electrical circuit and electrical equipment are damaged. If they are damaged, repair them in time to avoid unnecessary trouble.

在進行卷簾門維修中應注意檢查其電源和防火控制箱，如出現損壞可重新設置或更換。當卷簾門出現關不嚴或是開不完全的情況時，可以重新調整卷簾門的行程位置然后檢查其門體是否正常。讓卷簾門體單向運行，從而檢查其行程開關及行程開關接線。

The power supply and fire control box shall be checked during the maintenance of rolling shutter door, and it can be reset or replaced in case of damage. When the roller shutter door is not closed tightly or opened completely, you can readjust the travel position of the roller shutter door and check whether the door body is normal. Check the travel switch and the wiring of the travel switch by allowing the roller shutter door to run in one direction.

如果卷簾門電機正常動作，但門體不運行，主要的問題應該是簾片脫扣、卡死等原因，在對卷簾門維修時可以堅固五金件和調節簾片位置，如遇卷簾門體未關緊就自動反向關門或是開門，可以在卷簾門維修時增加其負載力。

If the motor of the roller shutter operates normally, but the door body does not operate, the main problem should be that the shutter is tripped, jammed, etc. During the maintenance of the roller shutter door, the hardware can be strengthened and the position of the shutter can be adjusted. If the roller shutter door body is not closed tightly, it will automatically reverse the door closing or open the door, and its load can be increased during the maintenance of the roller shutter door.

此外雖然現在科技不斷的發展，但由于時間問題，手動卷簾門還是具有一定市場，手動卷簾門維修方法有，當出現卷簾門折斷或是彈簧連接帶斷裂，在進行維修時可以更換彈簧吊帶。

In addition, despite the continuous development of science and technology, there is still a certain market for manual roller shutter doors due to time problems. There are maintenance methods for manual roller shutter doors. When the roller shutter door breaks or the spring connecting belt breaks, the spring sling can be replaced during maintenance.

手動卷簾門常出現的一個問題就是門鎖打不開或是鑰匙插不進去，可以將門鎖進行更換，如果卷簾門可以正常卷上去，在卷簾門維修不用考慮卷簾門的彈簧損壞與否，這種情況一般都是卷簾門上的簾片卡子卡住導槽或是簾片變形所致，可以針對卷簾門入導槽的槽口處進行維修。

A common problem with manual rolling shutter doors is that the door lock cannot be opened or the key cannot be inserted, so the door lock can be replaced. If the rolling shutter door can be rolled up normally, it is not necessary to consider whether the spring of the rolling shutter door is damaged during the maintenance of the rolling shutter door. This situation is generally caused by the clip of the shutter on the rolling shutter door jamming the guide slot or the deformation of the shutter. The maintenance can be carried out for the slot where the rolling shutter door enters the guide slot.

另外，卷簾門維修保養一般來說就是生產商維修，還有一些是專門負責維修的公司，我們可以在市面上找到。如果自己所在的城市較少卷簾門維修公司，那我們就應該在購入時與商家談好維修卷簾門事宜，簽訂好保修協議，索取聯系電話，日后聯系，自己來操作維修的話，還是有一定難度的。關注我們//domachine.com.cn，了解更多事項！

In addition, the maintenance of roller shutter doors is generally the manufacturer's maintenance, and there are some companies that are specially responsible for maintenance, which we can find on the market. If there are few roller shutter door maintenance companies in the city where we live, we should negotiate with the merchants about the maintenance of roller shutter doors, sign a warranty agreement, ask for the contact number, and contact them in the future. It is still difficult to operate the maintenance yourself. Follow us //domachine.com.cn , learn more!