現在卷簾門的應用十分廣泛，我們隨處可見，當然也是不同的，那如何保養卷簾門才能提高使用壽命，濟南電動卷簾門安裝維修廠家分享給你很好很有效的養護方法。

Now, rolling shutter doors are widely used, and we can see them everywhere. Of course, the prices are different. How to maintain rolling shutter doors can improve their service life. Jinan electric rolling shutter door installation and maintenance manufacturer will share with you very good and effective maintenance methods.

1.卷簾門安裝位置的上端有可靠的防火設施，在卷簾門卷筒下端做包箱或吊頂時須設置可拆式活動蓋板，在卷簾門彈簧下端預留500*500mm可拆檢修孔，以便于日后的維修保養。

1. There are reliable fire prevention facilities at the upper end of the installation position of the roller shutter door. When the lower end of the roller shutter door is used as a box or ceiling, a removable movable cover plate must be set. A 500 * 500mm removable manhole is reserved at the lower end of the roller shutter door spring to facilitate future maintenance.

2.當卷簾門運行時發生較大抖動或異常聲音時，應立即停機檢查，排除有礙門簾正常啟動的雜物。

2. In case of large shaking or abnormal sound during the operation of the roller shutter, the machine shall be stopped immediately for inspection, and the sundries that hinder the normal starting of the shutter shall be removed.

3.卷簾門的門簾和易生銹部位，要定期做防腐，油漆的保養處理，禁止用重物、硬物去撞擊門面。

3. The curtain and rust prone parts of the rolling shutter door shall be regularly treated with anti-corrosion and paint maintenance. It is prohibited to use heavy and hard objects to hit the door surface.

4.卷簾門的底梁座上限位置要與軸承下端保持不小于200mm的距離，以確保制動停止時不發生沖頂現象。

4. The upper limit of the bottom beam seat of the roller shutter door shall be at least 200mm away from the lower end of the bearing to ensure that there is no jacking when the brake stops.

5.在卷簾門啟閉停止過程中，應具備隨位停止功能，不應當出現停止而繼續下滑的現象，如果發生下滑距離大于50mm的現象，要立即對卷簾門的控制電器和制動機器進行檢查維修，直到運行正常為止。

5. In the process of opening and closing the roller shutter door, it should have the function of stopping with the position, and should not stop and continue to slide. If the sliding distance is more than 50 mm, the control electrical appliances and braking machine of the roller shutter door should be checked and maintained immediately until the operation is normal.

6.卷簾門的運行，滑行，傳動等部位要定期檢查，每年少3次，并根據機器需求及時加油，以確保卷簾門的正常運行。

6. The operation, sliding, transmission and other parts of the roller shutter shall be checked regularly at least three times a year, and oil shall be added timely according to the machine demand to ensure the normal operation of the roller shutter.

7.操作卷簾門時，操作者要站在能看到門簾運行狀態的位置，否則卷簾門會受意外的發生而受損。

7. When operating the roller shutter door, the operator should stand at the position where he can see the running state of the shutter, otherwise the roller shutter door will be damaged by accident.

8.所有受電動控制的卷簾門，啟閉運行方向須與開關箱指示相同，特別是在新接通電源試門或外來輸入電源變換電線時，應先使用手動裝置將門簾置于門洞高度的1/2的位置，接通電源后試操作卷門啟閉，直到與指示相同方可正常使用。

8. For all roller shutter doors under electric control, the opening and closing operation direction must be the same as the indication of the switch box. Especially when the power test door is newly connected or the external input power is changed, the manual device shall be used to place the shutter at 1/2 of the height of the door opening. After the power is connected, the roller shutter shall be opened and closed for trial operation until it is the same as the indication.

9.禁止用帶有酸、堿性溶液與卷簾門進行接觸，以防止腐蝕門簾表面。

9. It is prohibited to contact the rolling shutter door with acid and alkaline solutions to prevent corrosion of the surface of the shutter.

以上就是廠家為您整理的養護方法，在日常生活的使用中注意以上幾點，只要保養方法的得當，能夠大程度延長卷簾門的使用壽命。更多相關內容就來我們網站//domachine.com.cn咨詢吧！

The above are the maintenance methods arranged by the manufacturer for you. Pay attention to the above points in daily life. As long as the maintenance method is appropriate, the service life of the rolling shutter door can be greatly extended. More relevant content will come to our website //domachine.com.cn Consult!