當今建房一定離不開的一個環節就是車庫門的安裝，今天濟南車庫門安裝維修廠家就來給大家簡單介紹一下車庫門的測量方法以及安裝的決定因素。

Today, the installation of garage door is an indispensable link in building a house. Today, Jinan garage door installation and maintenance factory will give you a brief introduction to the measurement method of garage door and the determinants of installation price.

車庫門的測量方法：

Measuring method of garage door:

開口寬/高度：

Opening width/height:

通常普通家庭車庫門的寬度范圍2500mm-6000mm，高度范圍1900mm–2400mm。

Generally, the width range of the common family garage door is 2500mm-6000mm, and the height range is 1900mm – 2400mm.

頂距：

Top distance:

車庫門口上邊沿棚頂的距離，理想距離不得少于250mm,這個距離方便安裝車庫門的中軸桿。如果少于這個距離，工人就會建議加頂框。

The ideal distance from the upper edge of the garage door to the roof shall not be less than 250mm, which is convenient for installing the central shaft rod of the garage door. If the distance is less than this, the worker will suggest adding a top frame.

左右邊距：

Left and right margins:

車庫開門開口的左右墻垛的寬度，理想距離不得少于125mm，不夠這個距離工人會建議加邊框。

The ideal distance between the left and right wall buttresses of the garage door opening shall not be less than 125mm. If the distance is not enough, the workers will suggest adding a frame.

檢查水平：

Inspection level:

工人通常會用水平儀測量地面和開口上邊沿是否水平，如果水平差距超過20mm，工人會建議加底斜角或者頂斜角。

Workers usually use a level gauge to measure whether the ground and the upper edge of the opening are horizontal. If the horizontal difference exceeds 20mm, workers will suggest adding a bottom bevel or a top bevel.

除了這些測量，工人還要判斷車庫的開口、棚頂、開口左右墻垛等處是否有障礙物，檢查墻垛距離是否有足夠安裝邊框的高度和確保在這一寬度內縱深無障礙物，以便門軌道的安裝。

In addition to these measurements, workers should also judge whether there are obstacles at the garage opening, shed roof, left and right wall buttresses of the opening, check whether the distance between the wall buttresses is high enough to install the frame, and ensure that there are no obstacles in the depth within this width, so as to facilitate the installation of the door track.

車庫門安裝的決定因素：

Determinants of garage door installation price:

門的尺寸

Door size

就拿住戶和建筑商常選擇的普通彩色鋼板門來說，僅車庫門的高度和寬度不同就有超過20種范圍，工人要測量了之后才知道你的門是在哪一檔。

Take the ordinary color steel plate doors often selected by residents and builders as an example. Only when the height and width of the garage door are different, there are more than 20 price ranges. Workers will know the price of your door after measuring.

附加材料

Additional materials

然后再根據門的頂距，邊距，地面是否水平判斷你的車庫門是否需要附加邊框，頂框或者斜角。如果是自動門需要加上馬達開關，是否需要電工在車庫里加一個插座開關，這些也是的一部分。而這些附加的部分都會直接增加車庫門的安裝。

Then judge whether your garage door needs additional frame, top frame or bevel according to the top distance, edge distance and whether the ground is level. If an automatic door needs a motor switch, whether an electrician needs to add a socket switch in the garage is also part of the price. These additional parts will directly increase the installation price of the garage door.

馬達

Motor brand

根據軌道門的大小尺寸以及門的材料和重量，選擇合適的軌道門馬達是非常重要的，選擇不同的馬達和同不同馬力的馬達會有差異，也會對整個車庫門安裝成本有影響。

It is very important to select the appropriate motor for the track door according to the size and weight of the track door and the material and weight of the door. The selection of motors of different brands and motors of different horsepower of the same brand will have price differences, and will also have an impact on the installation cost of the entire garage door.

車庫門的測量方法及安裝的決定因素相關內容就講解到這里了，您對此有疑惑或者需求歡迎來我們網站//domachine.com.cn進行咨詢！

The measurement method of garage door and the determinants of installation price are explained here. If you have any doubt or need, please come to our website //domachine.com.cn Consult!