一般來說,如果客戶誤按鎖鍵,會導致屏幕上下錯門。當發生這樣的問題,如何?濟南電動卷簾門安裝維修人員認為遠程控制的關鍵控制,遠程控制鍵鎖可以鎖馬達。在這一點上,樹蔭下的遠程控制其他按鈕將會失敗,無法進行操作。此時,您可以按停止鍵解鎖。一般來說,如果電機鎖在異常情況下,可以采用以下解鎖。

Generally speaking, if the customer presses the lock key by mistake, it will cause the wrong door on the screen. When such a problem occurs, how to solve it? Jinan electric roller shutter door installation and maintenance personnel believe that the key control of remote control is that the remote control key lock can lock the motor. At this point, other remote control buttons under the shade will fail and cannot be operated. At this time, you can press the Stop key to unlock. In general, if the motor lock is abnormal, the following unlocking methods can be used.

打開卷簾門頂部的通道,然后慢慢把鏈。通道的位置通常是在右上角。簡單的方法是關閉電源。上電時,遙控鎖會電動釋放。

Open the channel at the top of the roller shutter door, and then slowly put the chain. The position of the channel is usually in the upper right corner. The simple way is to turn off the power. When powered on, the remote control lock will be released electrically.

此外如果您的卷簾門出現門拉不下來的情況，不要著急，可以這樣檢查：

In addition, if your roller shutter door cannot be pulled down, don't worry. You can check as follows:

1、先檢查卷簾門兩邊的滑槽是否有壞損，然后拉一下門，看是不是門的方向偏了。

1. First check whether the chute on both sides of the roller shutter door is damaged, and then pull the door to see if the direction of the door is wrong.

2、如果滑槽或者藏在滑槽內門邊沒有壞的話，可以在滑槽內使用黃油或潤滑油，減小摩擦。

2. If the chute or the door hidden in the chute is not damaged, you can use butter or lubricating oil in the chute to reduce friction.

3、如果是卷簾門方向偏了，則很可能是卷簾門上面的彈簧壞了，建議找專門的人員維修。

3. If the direction of the roller shutter door is off, it is likely that the spring on the roller shutter door is broken. It is recommended to find special personnel to repair it.

現在的電動卷簾門都帶斷電手動釋放系統，在斷電的情況下可通過手動搖桿使卷簾門升降。如果停電的時，自己剛好在卷簾門里面，不要恐慌，可以用旁邊的配機鐵鏈將門拉起。想要保證電動卷簾門在停電時依然能夠電動操作，則可以為卷簾門加裝不間斷電源，這樣就不怕它突然沒電。更多相關事項就來我們網站//domachine.com.cn咨詢吧！

The current electric roller shutter door is equipped with a power-off manual release system. In case of power failure, the roller shutter door can be lifted and lowered by the manual rocker. If you happen to be inside the rolling shutter door when the power is cut off, don't panic. You can pull the door up with the nearby machine iron chain. If you want to ensure that the electric shutter door can still be operated electrically in case of power failure, you can install an uninterruptible power supply for the shutter door, so that it is not afraid of sudden power failure. Come to our website for more relevant matters //domachine.com.cn Ask!