隨著科技的發展,電動卷簾門出現之后,給人們的生活是又有一大影響,但是,電動卷簾門在平時使用的時候會出現一些小故障,對此人們一定要做到多多的了解,以便能夠做的好的處理,下面就來和濟南電動卷簾門安裝維修廠家一起看看卷簾門不正常運行的表現吧。

With the development of technology, the emergence of electric roller shutter doors has had another significant impact on people's lives. However, electric roller shutter doors may encounter some minor malfunctions during normal use. It is important for people to have a better understanding of this in order to handle it properly. Let's take a look at the abnormal operation of roller shutter doors with the installation and maintenance manufacturer of electric roller shutter doors in Jinan.

卷簾門不正常運行時，可能會出現以下表現：

When the roller shutter door is not operating properly, the following symptoms may occur:

1.卷簾門無法打開或關閉：可能是卷簾門在移動過程中遇到障礙物或者卷簾門設備出現故障，需要檢查門體、滑軌和電機等部件是否有損壞或卡住。

1. The rolling shutter door cannot be opened or closed: It may be due to obstacles encountered during movement or malfunction of the rolling shutter equipment. It is necessary to check whether the door body, slide rails, and motor components are damaged or stuck.

2.卷簾門運行緩慢：可能是電機功率不足，或是滑軌上積聚了雜物，需要清理滑軌和檢查電機工作情況。

2. The rolling shutter door runs slowly: it may be due to insufficient motor power or accumulation of debris on the slide rail, and it is necessary to clean the slide rail and check the operation of the motor.

3.卷簾門發出異常的噪音：可能是門體與滑軌之間的摩擦過大，或是設備出現故障，需要對門體和滑軌進行潤滑和檢查是否存在故障。

3. The rolling shutter door emits abnormal noise: it may be due to excessive friction between the door body and the sliding rail, or due to equipment failure. It is necessary to lubricate the door body and the sliding rail and check for any faults.

4.卷簾門上下擺動或晃動：可能是門體松動或滑軌不平整，需要檢查門體和滑軌的連接處是否緊固和平整。

4. Rolling shutter door swinging or shaking up and down: It may be due to loose door body or uneven sliding rail. It is necessary to check whether the connection between the door body and the sliding rail is tight and flat.

5.卷簾門開啟高度不夠或超過規定高度：可能是設置高度限制的開關出現問題，需要檢查調整開關的位置和靈敏度。

5. The opening height of the roller shutter door is not enough or exceeds the specified height: It may be due to a problem with the switch that sets the height limit. It is necessary to check and adjust the position and sensitivity of the switch.

電動卷簾門常見故障怎么維修?

How to repair common faults of electric roller shutter doors?

1、當電動卷簾門無法啟動或者是啟動較慢的時候。我們要檢查電動機是否能夠正常運行工作,若不能則更換電動機。然后檢查機械部分有沒有卡住的地方,有的話就掉即可。

1. When the electric roller shutter door cannot be started or starts slowly. We first need to check whether the motor can operate normally, and if not, replace the motor. Then check if there are any stuck areas in the mechanical part, and if so, remove them.

2、當出現控制器失效時,我們應該更換電源接觸器,然后更換傳動齒輪。當出現電動機震動頻率過大,噪聲過大時。先應檢查軸承是否老化,然后檢查滑動輪是否需要添加潤滑油等。檢查電動機是否損壞。

2. When the controller fails, we should first replace the power contactor and then replace the transmission gear. When there is excessive vibration frequency and noise of the motor. First, check if the bearings are aging, and then check if the sliding wheels need to be lubricated. Check if the motor is damaged.

3、要提醒大家的是,滑動輪和驅動器一年少要添加一次潤滑油,傳動皮帶一年要進行一次檢修,還有定時檢查各部件的磨損情況。

3. It should be reminded that the sliding wheel and driver should be lubricated at least once a year, the transmission belt should be inspected once a year, and the wear of each component should be checked regularly.

以上是卷簾門不正常運行的一些表現，不同的表現可能由不同的原因引起，如果卷簾門出現故障需要及時進行檢修和維護，以保證卷簾門的正常運行。如果自行檢修無法問題，建議聯系服務人員進行檢修和維護。您還有什么需求可以隨時來我們網站//domachine.com.cn咨詢！

The above are some manifestations of abnormal operation of the roller shutter door, which may be caused by different reasons. If the roller shutter door malfunctions, timely maintenance and repair are required to ensure the normal operation of the roller shutter door. If self inspection cannot solve the problem, it is recommended to contact professional service personnel for inspection and maintenance. If you have any further needs, please feel free to come to our website at any time //domachine.com.cn consulting service