現在經常由于許多的卷簾門廠家生產出廠的卷簾門問題而給人們的生活帶來不便的事情，從中濟南電動卷簾門安裝維修人員發現，對于以前的一些簾門廠出產的卷簾門經常會存在一些問題。

Nowadays, many roller shutter door manufacturers often encounter inconvenience in people's lives due to problems with the rolling shutter doors produced by them. From this, the installation and maintenance personnel of Jinan electric roller shutter doors have found that there are often some problems with the rolling shutter doors produced by some previous roller shutter factories.

而對于這些問題我們就需要為之付出一些思考的問題，如果說我們每天都要碰到其中一些電動卷簾門卷過的情況，那么也就嚴重的影響我們的生活狀況。那么對于這些電動卷簾門如果卷過了我們應該怎么辦呢？

And for these issues, we need to put in some thinking. If we encounter some electric rolling shutter doors rolling over every day, it will seriously affect our living conditions. So what should we do if these electric roller shutter doors are rolled over?

你必須有足夠高的梯子或者架子能夠用手抓住卷簾門上面，同時要兩個人配合。假如該電動卷簾門在半空中的話，那么二人同時把卷簾門卷到頂后，從滑道拉出來再往上卷、貼墻面放進去入道軌，拉一下看，應該沒問題了。

You must have a ladder or shelf high enough to hold onto the roller shutter door with your hands, and two people must cooperate. If the electric roller shutter door is in mid air, then two people should roll it up to the top at the same time, pull it out of the slide, then roll it up, stick it to the wall, and put it into the track. Pull it up and see, it should be no problem.

也可以用管鉗夾住卷簾門軸緊一圈，但是你必須二人配合好，兩邊螺絲不要一起松，要先松一面并用管鉗夾住，后再松另一面在進行緊軸。

You can also use pipe pliers to clamp the roller shutter door shaft tightly for one turn, but you must cooperate well with two people. Do not loosen the screws on both sides together, first loosen one side and clamp it with pipe pliers, and then loosen the other side before tightening the shaft.

這種情況是屬于彈簧的毛病，以后你要注意開門時用開門的鉤子往上送到頂，不要讓它隨彈簧的慣性猛沖，否則還會犯毛病！

This situation belongs to the problem of the spring. In the future, you should pay attention to using the hook to lift the door up to the top when opening the door, and do not let it rush with the inertia of the spring, otherwise it will still cause problems!

此外使用期間，卷簾門電機連續卷動時間不得超過5-10分鐘，因電機連續運轉時間超過規定時間電機容易發熱，若電機溫度超過120℃，機內熱保護器自行斷電，待溫度降到70℃（約8分鐘）保護裝置才能自動復位，方可繼續使用。當出現上述現象時，一定要冷靜分析，正確排除，切不可盲目拆卸，以免造成不必要的損失。

In addition, during use, the continuous rolling time of the roller shutter door motor should not exceed 5-10 minutes. As the motor runs continuously for more than the specified time, it is easy for the motor to heat up. If the motor temperature exceeds 120 ℃, the internal thermal protector will power off automatically. The protection device can only reset automatically when the temperature drops to 70 ℃ (about 8 minutes) before continuing to use. When the above phenomenon occurs, it is necessary to calmly analyze and correctly eliminate it. Blind disassembly is not allowed to avoid unnecessary losses.

針對于電動卷簾門如果卷過了的問題我們就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站//domachine.com.cn咨詢！

That's all we have to say about the issue of electric roller shutter doors being rolled over. We hope to provide you with good help. For more information, please come to our website //domachine.com.cn consulting service