電動卷簾門通過傳動裝置和控制系統實現電動卷簾門的升降，起到防火和隔熱的作用。電動卷簾門因其美觀、剛性強等優點，深受市場消費者青睞，廣泛應用于工業和民用建筑的防火隔斷領域。你知道判斷電動卷簾門卷布質量時應該注意什么嗎?接下來，濟南電動卷簾門安裝維修廠家會帶大家去下面了解一下。

The electric Roller shutter realizes the lifting of the electric Roller shutter through the transmission device and control system, playing the role of fire prevention and heat insulation. Electric Roller shutter is favored by market consumers because of its beauty, rigidity and other advantages, and is widely used in the field of fire partition of industrial and civil buildings. Do you know what should be paid attention to when judging the quality of rolling cloth of electric Roller shutter? Next, the installation and maintenance manufacturer of Jinan electric Roller shutter will take you to the following to understand.

電動卷簾門廠家建議大家從外觀、顏色、縫制等方面進行介紹。不同部件的不同類型電動卷簾門所需的質量標準不同。詳情如下：

The manufacturer of electric Roller shutter suggests that you introduce it from the aspects of appearance, color, sewing, etc. Different types of electric Roller shutter of different parts require different quality standards. The details are as follows:

1、外觀

1. Appearance

濟南電動卷簾門簾面表面應無撕裂、缺角、打補丁、破洞、傾斜、跳線、斷線、經緯線密度明顯不均勻等缺陷。整個簾面表面應美觀、平直、整潔。簾面表面的所有部件應組裝拼接，不得錯位，所有緊固件應牢固無松動。

The surface of Jinan electric roller shutter shall be free of defects such as tearing, missing corners, patching, holes, inclination, jumper, broken wires, and obvious uneven Linear density of longitude and latitude. The entire curtain surface should be beautiful, straight, and neat. All components on the surface of the curtain should be assembled and spliced without misalignment, and all fasteners should be firm and not loose.

2、顏色

2. Color

對于同一產品和同一工程，好的電動卷簾門的防火簾面應無明顯色差。

For the same product and project, the fire curtain surface of good electric Roller shutter shall be free of obvious color difference.

3、縫制

3. Sewing

電動卷簾門簾面的翹曲方向應為簾面的受力方向;簾面拼接縫的個數每米內各層累計不應超過3條，接縫應避免重疊;窗簾表面的受力縫應采用雙線縫制，拼接縫的搭接量不小于20毫米;非受力縫可以用同一根線縫制，拼接縫的搭接量不應小于10毫米。

The warping direction of the curtain surface of the electric roller shutter shall be the force bearing direction of the curtain surface; The number of joint joints on the curtain surface should not exceed 3 in each layer per meter, and overlapping joints should be avoided; The stress seam on the surface of the curtain should be made with double stitches, and the overlap of the splicing seam should not be less than 20mm; Non stressed joints can be sewn with the same thread, and the overlap of the joint should not be less than 10mm.

在閱讀了上述電動卷簾門廠家關于判斷濟南電動卷簾門卷布質量的介紹后，我相信大家對卷布的質量都有一定的了解。我希望這些內容對每個人都有幫助。更多詳情，您可以關注網站趨勢//domachine.com.cn，歡迎大家隨時訪問和購買。

After reading the introduction of the above electric Roller shutter manufacturer on judging the quality of the roll cloth of Jinan electric Roller shutter, I believe that everyone has a certain understanding of the quality of the roll cloth. I hope these contents are helpful to everyone. For more details, you can follow website trends //domachine.com.cn Welcome to visit and purchase anytime.