防火門在使用中經常出現哪些問題?
在建筑設計過程中,設計師往往按照防火標準的要求設計防火門。當建筑物發生火災時,這種防火門可以搭建特殊的防火隔斷墻來實現防火,減緩火勢的快速蔓延,便于及時疏散。
In the process of architectural design, designers often design fire doors according to the requirements of national fire protection standards. When a fire occurs in a building, the fire door can build a special fire partition wall to realize fire prevention, slow down the rapid spread of the fire and facilitate timely evacuation.
濟南防火門
Jinan fire door
1、常閉防火門開啟
1. Normally closed fire door open
消防監督檢查發現,有些地方經常關閉的防火門經常打開。這種情況主要是人為因素造成的。通常關閉的防火門可能會給一些使用中的人帶來問題。因此,一些部門和工作人員采取取下閉門器或用楔子壓住它的方法,使防火門長時間保持開啟而不自動關閉。
Fire control supervision and inspection found that fire doors that are often closed in some places are often opened. This situation is mainly caused by human factors. Normally closed fire doors may cause problems for some people in use. Therefore, some departments and staff take the method of removing the door closer or pressing it with a wedge to keep the fire door open for a long time without automatically closing.
或因維護管理疏忽導致門損壞無法關閉。在這種情況下,一旦發生火災,門就不能起到防火隔熱的作用,甚會加快火勢蔓延的速度。因此,用戶在日常使用中的檢查工作非常重要。
Or the door is damaged and cannot be closed due to negligence of maintenance and management. In this case, in case of fire, the door can not play the role of fire prevention and insulation, and even accelerate the spread of the fire. Therefore, the user's inspection in daily use is very important.
2、閉門器缺失或工作不正常
2. Door closer missing or not working properly
部分機構在運行過程中,防火門會影響室內照明和交通,經檢查合格后由消防部門拆除。
During the operation of some mechanisms, the fire doors will affect the indoor lighting and traffic, which will be removed by the fire department after passing the inspection.
在某些情況下,商品搬運強行開門,嚴重損壞閉門器;如果長時間打開門,閉門器將失去關閉力。濟南防火門廠家提醒大家,如果不定期進行維護保養,故障無法立即,會影響其性能。
In some cases, the door is forcibly opened by commodity handling, which seriously damages the door closer; If the door is opened for a long time, the door closer will lose its closing force. Jinan fire door manufacturer reminds everyone that if the maintenance is not carried out regularly, the fault cannot be solved immediately, which will affect its performance.
3、防火門的門框、門板破損、剝落
3. The door frame and door panel of the fire door are damaged and peeled off
防火門使用時間長,缺乏定期保養,容易損壞門框和松緊帶。一些單位在運行過程中忽視了對防火門的定期維護保養,導致防火門在日常運行中摔壞或損壞,未及時采取維護措施。長此以往,防火門的防火功能會嚴重削弱。
The fire door has been used for a long time and lacks regular maintenance, which is easy to damage the door frame and elastic belt. Some units ignored the regular maintenance of the fire door during operation, resulting in the fire door falling or damaged in daily operation, and did not take maintenance measures in time. In the long run, the fire protection function of fire doors will be seriously weakened.
濟南防火門
Jinan fire door
關于濟南防火門在使用中經常出現的問題解析,希望對大家有所幫助,讓您的防火門更好的發揮作用。如果發現門有缺陷,自己無法處理,建議用戶找濟南防火門廠家處理,以免日后發生意外火災影響被困人員。
Jinan fire door on the use of common problems analysis, I hope to help you, let your fire door better play a role. If the door is found to be defective and cannot be handled by yourself, it is recommended that the user find the Jinan fire door manufacturer to deal with it, so as to avoid accidental fire affecting the trapped personnel in the future.