關于電動卷簾門怎么調限位?大家一起來了解下吧
現在特別多的物品在局限性上都已經有了突破,很多一些之前大家覺得笨重的物品現在都也是慢慢的有了改觀,而這一切也主要是因為科技的不斷進步,店鋪在關門后大家應該都會見到一扇大鐵門從上而下的進行關閉,這個也就是卷簾門,而現在電動卷簾門也已經出現了,那么電動卷簾門怎么調限位?電動卷簾門故障怎么辦?
At present, many items have made breakthroughs in their limitations. Many items that used to be bulky have slowly changed. All this is mainly due to the continuous progress of science and technology. After the store is closed, everyone should see a large iron door closed from top to bottom, that is, the rolling shutter door, Now the electric rolling shutter door has also appeared, so how to adjust the limit of the electric rolling shutter door? What about the failure of electric rolling shutter door?
電動卷簾門怎么調限位?
How to adjust the limit of electric rolling shutter door?
用手拉動環形鏈條使門簾離地面1米左右,先試“上”、“停”、“下”按鍵,觀察門升、停、降各功能是否靈敏可靠,若正常,即可將門簾上升或下降到確定的位置。
Pull the ring chain by hand to make the door curtain about 1m above the ground. First try the "up", "stop" and "down" buttons to observe whether the door lifting, stopping and lowering functions are sensitive and reliable. If they are normal, the door curtain can be raised or lowered to the determined position.
1、將限位器上的螺母卡片撥動適當的角度以脫開限位螺母,或是松開限位器上的鎖緊螺釘。
1. Move the nut card on the stopper at an appropriate angle to disengage the stopper nut, or loosen the locking screw on the stopper.
2、把門開到合適的位置后,旋轉限位器上的限位螺母使其壓住開門限位開關上的滾輪,聽到“滴達“聲后,把螺母卡片卡入限位螺母的相應槽中或是旋緊螺釘。
2. After opening the door to a proper position, rotate the limit nut on the limiter to press the roller on the door opening limit switch. After hearing the "drip" sound, clip the nut card into the corresponding groove of the limit nut or tightn the screw.
3、把門關到合適的位置后,襄陽|理想門業提示旋動限位器上的限位螺母使其壓住關門限位開關上的滾輪,聽到“滴達“聲后,把螺母卡片卡入限位螺母的相應槽中或是旋緊螺釘。
3. After closing the door to the appropriate position, Xiangyang ideal door industry prompts to rotate the limit nut on the limiter to press the roller on the closing limit switch. After hearing the "drop" sound, clip the nut card into the corresponding slot of the limit nut or tighten the screw.
4、若開關門位置不合適,可重新進行調整,以達到位置。
4. If the opening and closing position is inappropriate, it can be adjusted again to achieve the best position.
The above highlights come from: Jinan electric rolling shutter door installation and maintenance to share. For more highlights, please click to enter our website:
//domachine.com.cn , we will have more wonderful content for you to see