韩国精品一区二区三区四区_伊人久久大线影院首页_JIZZJIZZ丝袜老师_玩弄粉嫩少妇高潮出白浆AⅤ

您好,歡迎訪問濟南愛窗加工部 的網站!
客戶服務熱線:13296405222

地址:濟南市天橋區天橋東街后陳家樓31號

聯系我們
濟南愛窗加工部

聯系人:孟經理

聯系電話:13296405222

網址://domachine.com.cn

地址:濟南市天橋區天橋東街后陳家樓31號

當前位置: 首頁 > 新聞資訊 > 公司新聞

防火卷簾門如何進行限位調試?

來源://domachine.com.cn/  發布時間:2018-12-27 11:57:17

鋼制防火卷簾門廠家介紹到作業人員需求從頭把卷簾門進行開關,檢查卷簾門在開關的過程中是不是有疑問,假如有疑問的話,以便及時的進行更正。在調試的時候,卷簾門下面禁止站人,由于卷簾門的重量是很大的,假如卷簾門不受操控的話,就很簡單對站在卷簾門下的人,形成很大的損傷。
 
The manufacturer of steel fireproof rolling shutter door introduces that the operator needs to open and close the rolling shutter door from the beginning. Check whether there is any doubt in the process of opening and closing the rolling shutter door. If there is any doubt, it can be corrected in time. When debugging, it is forbidden to stand under the rolling shutter door. Because the weight of the rolling shutter door is very large, if the rolling shutter door is not controlled, it is very simple to form great damage to the people standing under the rolling shutter door.
 
關于卷簾門電機調試,鋼制防火卷簾門廠家介紹如下:
 
About the rolling shutter motor debugging, the manufacturers of steel fireproof rolling shutter door are introduced as follows:
 
對防火卷簾門電機調試前,應先松開限位組織的鎖緊螺釘,然后用手拉動環形鏈,使卷簾離地面1米左右,先試“上”、“停”、“下”按鍵,調查卷簾門升、停、降各功用,是不是靈敏可靠,若正常即可將卷簾門上升或下降到您確定的方位后,旋動限位螺套,調整碰微動開關滾輪,聽到“滴達”聲后,擰緊鎖緊螺釘,重復調試,使限位到達比較好的方位時,再將鎖緊螺釘用手指用力旋緊即可。
 
Before debugging the motor of fireproof rolling shutter door, first loosen the locking screw of the limiting organization, and then pull the ring chain by hand to make the rolling shutter about 1m above the ground. First try the "up", "stop" and "down" buttons to investigate whether the rolling shutter door's functions of raising, stopping and lowering are sensitive and reliable. If it is normal, the rolling shutter door can be raised or lowered to the position you determine, and then rotate the limiting screw sleeve to adjust Touch the microswitch roller and hear the sound of "Dida", tighten the locking screw and repeat the debugging. When the limit reaches a better position, tighten the locking screw with fingers.
 
還需求留意調試防火卷簾門和電機的次數,一般來說,調試三到四次是比較合適的,可以較好的調查防火卷簾門的工作狀況。
 
Also need to pay attention to the number of debugging fire shutter door and motor, generally speaking, debugging three to four times is more appropriate, can better investigate the working condition of fire shutter door.